Paradyne 4200 - Manual (Page 145)

6. Cross Connect Commands
4200-A2-GB20-00 August 2002 6-11
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-CRS-VC:[tid]:aid_vcl:[ctag]::::[pstf] */
nt_vci,lt_vci:::state
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-CRS-VC:[tid]:aid_vci:[ctag]::::[pstf] */
errcde
;
Table 6-8. RTRV-CRS-VC Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
nt_vci Virtual Channel Identifier for the Virtual Channel Link on the NT
(network) side. Values are:
NTVCL-vpi-vci
– vpi: Virtual Path Identifier
– vci: Virtual Channel Identifier for the Virtual Channel Link