Paradyne 4200 - Manual (Page 361)

C. Traps and MIBs
4200-A2-GB20-00 August 2002 C-37
loginUserPriv Contains the access privileges of the
user. Read only. Valid values are:
T administrator(1)
T operator(2)
loginStatus Indicates whether the user is still
accessing the device. Read only. Valid values are:
T active(1)
T inactive(2)
loginFailureAccessApp Describes the access application used
by the end user to access the device. Read only. Valid values are:
T console(1)
T telnet(2)
T ftp(3)
loginFailureCount Contains the number of unsuccessful
logins for console, FTP or Telnet. Read only.
trapCommunityName The name of the SNMP community. Data string (1
−
32).
trapDestAndPort The IP address and port of the
destination of the trap. Address.
trapsEnable Turns traps on (enable) or off (disable)
for a particular destination. Valid values are:
T enable(1)
T disable(2)
trapRowStatus Used to add or delete a row from the
table. Read only.
entCommunityName The SNMP community name. Data string.
entCommunityType The type of community. Valid values are:
T readOnly(1): Community can only do
gets. Default value.
T readWrite(2): Community can do gets
and sets.
entCommunityRowStatus Used to add or delete a row from the
table. Read only.
sysDevUserAccountUserId The login ID of the user account. Display string.
sysDevUserAccountPrivilege The access privililege of the user
account. Valid values are:
T operator(1)
T administrator(2)
sysDevUserAccountUserPas
sword The password of the user account. Display string.
sysDevUserAccountUser
Partition The access partition of the user
account. Default is ALL.
sysDevUserAccountRow
Status Used to add or delete a row from the
table. Read only.
Table C-15. Paradyne DSLAM System MIB Objects (2 of 3)
Object Description Setting/Contents