Perle Systems IOLAN SDS - Manual (Page 120)

L2TP/IPsec
120 IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7
country
A two character country code; for example, US. This field is case sensitive in order to
successfully match the information in the remote X.509 certificate. An asterisk (*)
works as a wildcard.
state-province
Up to a 128 character entry for the state/province; for example, IL. This field is case
sensitive in order to successfully match the information in the remote X.509 certificate.
An asterisk (*) works as a wildcard.
locality
Up to a 128 character entry for the location; for example, a city. This field is case
sensitive in order to successfully match the information in the remote X.509 certificate.
An asterisk (*) works as a wildcard.
organisation
Up to a 64 character entry for the organisation; for example, Accounting. This field is
case sensitive in order to successfully match the information in the remote X.509
certificate. An asterisk (*) works as a wildcard.
organisation-unit
Up to a 64 character entry for the unit in the organisation; for example, Payroll. This
field is case sensitive in order to successfully match the information in the remote
X.509 certificate. An asterisk (*) works as a wildcard.
common-name
Up to a 64 character entry for common name; for example, the host name or fully
qualified domain name. This field is case sensitive in order to successfully match the
information in the remote X.509 certificate. An asterisk (*) works as a wildcard.
email
Up to a 64 character entry for an email address; for example, [email protected].
This field is case sensitive in order to successfully match the information in the remote
X.509 certificate. An asterisk (*) works as a wildcard.
ipsec-local-ip-address
The IPv4 address that the IOLAN will listen on for L2TP/IPsec connections. If the
default value (0.0.0.0) is kept, the IOLAN will use the Default Gateway value (if no
Default Gateway is specified, L2TP/IPsec VPN connections will error out).
Default: 0.0.0.0
local-ip-address
Specify the unique IPv4 address that hosts accessing the IOLAN through the L2TP
tunnel will use.
Field Format: IPv4 address
local-ipv4-start-address
Specify the first IPv4 address that can be assigned to incoming hosts through the L2TP
tunnel.
Field Format: IPv4 address
local-ipv4-end-address
Specify the end range of the IPv4 addresses that can be assinged to incoming hosts
through the L2TP tunnel.
Field Format: IPv4 address