Perle Systems IOLAN SDS - Manual (Page 54)

Commands for Users Logged Into the IOLAN
54 IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7
Set User Session
routing
Determines the routing mode used for RIP packets on the PPP and SLIP interfaces for
this user. Values are:
z None—RIP packets are neither received nor sent by the IOLAN.
z Send—RIP packets can only be sent by the IOLAN.
z Listen—RIP packets can only be received by the IOLAN.
z Send and Listen—RIP packets are sent and received by the IOLAN.
password
The password the user will need to enter to login to the IOLAN. This case-sensitive
field accepts a maximum of 16 characters.
Description Sets the current users session settings.
User Level Normal, Admin
Syntax
set user . session 1|2|3|4|* [auto on|off]
[type off|telnet|rlogin|ssh]
set user . session 1|2|3|4|* telnet-options [host <config_host>]
[port <TCP_port>] [termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off] [echo <00-7f>]
[eof <00-7f>] [erase <00-7f>] [intr <00-7f>] [quit <00-7f>]
set user . session 1|2|3|4|* rlogin-options [host <config_host>]
[termtype <terminal_name>]
set user . session 1|2|3|4|* ssh-options [host <config_host>]
[port <TCP_port>] [termtype <terminal_name>]
[protocol ssh-1|ssh-2|ssh-2/1] [compression on|off]
[verbose on|off] [auto-login on|off] [name <string>]
[password <string>] [ssh-1-cipher 3des|des|blowfish]
[authentication rsa on|off] [authentication dsa on|off]
[authentication keyboard-interactive on|off]
set user . session 1|2|3|4|* ssh-options
ssh-2-cipher-list <3des blowfish cast aes arcfour>
Options session
Specifies the session number (or all, *) that you are configuring.
auto
Specify whether or not the session(s) will start automatically when the user logs into the
IOLAN.
telnet-options
See Set Telnet-Client in the IOLAN User’s Guide.
rlogin-options
See Set Rlogin-Client
in the IOLAN User’s Guide.
ssh-options
See Set SSH-Client
in the IOLAN User’s Guide.