Perle Systems IOLAN SDS - Manual (Page 48)

IPv6 Commands
48 IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7
Add Custom-IPv6
Description
User Level Admin
Syntax
add custom-ipv6 [eth1|eth2] method auto
network-prefix <network_prefix>
[prefix-bits <0-64>] [router-advertisement on|off]
add custom-ipv6 [eth1|eth2] method manual
ipv6-address <ipv6_address> [prefix-bits <0-128>]
[router-advertisement on|off]
Options eth1|eth2
Configures the custom IPv6 settings for the IOLAN’s Ethernet interface 1 or Ethernet
interface 2 (SCS models only) interface.
method auto
When this option is specified, the IOLAN will derive an IPv6 address from the entered
network prefix and the IOLAN’s MAC address. This is the default option.
network-prefix
Specify the IPv6 network prefix. The IOLAN will derive the complete IPv6 address
from the entered network prefix and the IOLAN’s MAC address.
prefix-bits (auto)
Specify the network prefix bits for the IPv6 address.
Range: 0-64
Default: 64
method manual
Specify this option when you want to enter a specific IPv6 address.
ipv6-address
Specify the complete IPv6 address.
Field Format: IPv6 address
prefix-bits (manual)
Specify the network prefix bits for the IPv6 address.
Range: 0-128
Default: 64
router-advertisement
When enabled, the IPv6 address is advertised when the IPv6-router-advertisement
parameter is enabled.