Perle Systems IOLAN SDS - Manual (Page 41)

Server Commands 41
Clustering Commands
Set Clustering Slave-IP
Show Clustering Slave-IP
Description Modify the parameter associated with a specific port in a clustering group.
User Level Admin
Syntax
set clustering slave-ip <IPv4_address> port <number>
[master-tcp-port <10001-65535>] [name <port_name>]
[protocol telnet|ssh|not-used] [slave-ds-port <10001-65535>]
Options <IPv4_address>
Specify the IP address of the clustering slave you wish to modify. This clustering slave
must already exist in the clustering group. The IP address must be in a valid IPv4
format.
port
Specify the port number that you wish to modify on this clustering slave.
master-tcp-port
Specify this parameter if you wish to change the name associated with this slave port.
name
Specify this parameter if you wish to change the name associated with this slave port.
protocol
Specify this parameter if you wish to change the protocol used to access this slave port.
Valid options are SSH, Telnet or not used if you wish to disable access to this port.
slave-ds-port
Specify this parameter if you wish to change the slave-ds-port associated with this
slave port. This should match the port number configured for this port on the salve
IOLAN.
Description Show a Slave IOLANs clustering group settings. Type
show clustering slave-ip ? to get a list of Slave IOLAN IP addresses.
User Level Admin
Syntax
show clustering slave-ip <IPv4_address> [get-port-names]
[get-port-names-and-save]
Options <IPv4_address>
Specify the IP address of the clustering slave you wish to modify. This clustering slave
must already exist in the clustering group. The IP address must be in a valid IPv4
format.
get-port-names
Retrieves the port/line names from the specified Slave IOLAN.
get-port-names-and-save
Retrieves the port/line names from the specified Slave IOLAN and saves them in the
Slave IOLAN clustering configuration.