Perle Systems IOLAN SDS - Manual (Page 85)

Line Commands 85
Line Service Commands
Set PPP Dynamic-DNS
Set SLIP
Description This option is only available when IP address negotiation ( ipaddr-neg ) is on . When
enabled, the IOLAN will automatically update the DNS server with the specified host
name and negotiated IP address for the PPP session.
User Level Admin
Syntax
set ppp line .|<number>|* dynamic-dns [on|off]
[hostname <hostname>] [username <username>]
[password <password>]
Options hostname
Specify the host name that will be updated with the PPP session’s IP address on the
DynDNS.org server.
username
Specify the user name used to access the DynDNS.org server.
password
Specify the password used to access the DynDNS.org server.
Description Configures the lines SLIP settings.
User Level Admin
Syntax
set slip line .|<number>|* [lipaddr <IPV4_address>]
[mtu <256-1006>] [netmask <IPV4_address>]
[ripaddr <IPV4_address>] [vj-comp on|off]
[routing none|send|listen|send-and-listen]
Options lipaddr
The IPv4 address of the IOLAN end of the SLIP link. For routing to work you must
enter an IP address in this field. Choose an address that is part of the same network or
subnetwork as the remote end; for example, if the remote end is address
192.101.34.146, your local IP address can be 192.101.34.145. Do not use the IOLAN’s
(main) IP address in this field; if you do so, routing will not take place correctly.
mtu
The Maximum Transmission Unit (MTU) parameter restricts the size of individual
SLIP packets being sent by the IOLAN. Enter a value between 256 and 1500. The
default value is 256 . If your user is authenticated by the IOLAN, this MTU value will
be overridden when you have set a Framed MTU value for the user. If your user is
authenticated by RADIUS and the RADIUS parameter Framed-MTU is set in the
RADIUS file, the IOLAN will use the value in the RADIUS file in preference to the
value configured here.
netmask
The network subnet mask. For example, 255.255.0.0. If your user is authenticated by
RADIUS and the RADIUS parameter
Framed-Netmask is set in the RADIUS file, the
IOLAN will use the value in the RADIUS file in preference to the value configured
here.