Printronix L5020 - Manual (Page 106)

Chapter 3 Downloading Into Flash Memory
106
K3 DC PROGRAM
NOT VALID There is no emulation installed or the
emulation in flash memory is corrupted.
Install/re-install emulation software to the
printer.
K4 NO FLASH FILE
SYSTEM The flash file system is corrupted or the
flash memory is unformatted.
Install/re-install emulation software to the
printer.
K5 DRAM FAIL AT
ADDRESS
xxxxxxxx
Contact your authorized service
representative.
K6 FLASH MEMORY
FAIL Contact your authorized service
representative.
K7 PROGRAM FLASH
FAIL AT
xxxxxxxx
Contact your authorized service
representative.
K8 FLASH MEMORY
FAIL There is not enough flash memory space
for the emulation or file download.
Initiate the flash file system optimization.
K9 PROGRAM
NEEDS MORE
DRAM Make sure DRAM devices are all detected
by the system.
Contact your authorized service
representative.
Error Code Message Explanation