Replacing the photoreceptor drum, Removal, Caution – Printronix L5020 User Manual
Page 115: Turn the power switch off, Vacuum any spilled toner
Replacing The Photoreceptor Drum
115
Replacing The Photoreceptor Drum
Drum life is dependent upon media used and proper maintenance
and operation of the printer. Print media other than bond paper
(e.g., labels, card stock, plastic, or vinyl) may reduce drum life as
much as 50%.
To replace the drum, you need a drum auxiliary rod. Please read all
steps before beginning the replacement procedure.
Removal
CAUTION
Do not do this procedure unless you have had the appropriate
training. Do not do this procedure without the drum auxiliary
rod (P/N 703531-170), as you may damage the drum.
1.
Turn the power switch OFF.
2.
Open the printer upper doors. (See page 109.)
3.
Open the waste toner recovery unit. (See page 113.)
4.
Remove the developing unit. (See page 123.)
5.
Vacuum any spilled toner.