Printronix L5020 - Manual (Page 83)

Miscellaneous Menu
83
If a fault occurs while printing a hex dump, the printer reverts to the
normal fault state. When the fault is cleared, the printer resumes
printing the hex dump (either a partial line with a form feed, or
nothing at all). Top-of-form remains unaffected.
Figure 8. Sample Hex Dump
To begin a hex dump, first place the printer offline and enable the
Hex Dump Mode option from the control panel. Next, place the
printer online. Finally, send data to the printer from the host
computer. Any data received from the host is “dumped” to the
printout.
To cancel a hex dump, first place the printer offline. Then, disable
the Hex Dump Mode option from the control panel. The paper then
may be advanced to the next top-of-form.
PTX SETUP Option
The PTX SETUP Option menu selection has two submenu
selections: Setup Parse and Setup SFCC.
Setup Parse
Setup Parse allows you to enable or disable PTX SETUP
processing. If Setup Parse is disabled, the printer prints PTX
SETUP commands as regular text. The default setting is Disabled.
Setup SFCC
Setup SFCC sets the Special Function Control Code (SFCC) for
the PTX SETUP functions. The default setting is decimal 33. (!
Character)