A. reload the paper onto the tractors, B. press clear, Important – Printronix L5020 User Manual
Page 183: A fault occurs, Clear the fault condition, Press clear
Reprinting Pages After Fault Condition
185
If the fault is cleared, and if you need to reload paper into the
tractors (such as after a paper jam), the following message
appears:
a.
Reload the paper onto the tractors.
b.
Press CLEAR.
c.
Press ONLINE to resume printing. Note that pages have
been lost.
If the fault is cleared, and if you have already reloaded the
paper while clearing the fault condition (in Step 2), the following
message appears:
5.
Press ONLINE to resume printing. Note that pages have been
lost.
IMPORTANT
If Reprint on Fault is disabled and an error occurs, and if either
the “RELOAD PAPER IN TRACTORS” or “NOT PRINTING
FAILED PAGES” message appears, then any pages removed
from the printer are not reprinted, and the data on them is lost.
Procedure For Fault Clearing - Reprint On Fault
Enabled
1.
A fault occurs.
2.
Clear the fault condition.
3.
Press CLEAR.
4.
The STAND BY LED blinks and the following message appears
while the printer attempts to clear fault:
Reload Paper
in Tractors
Not Reprinting
Failed Pages
Standby...
Clearing Fault