Printronix L5020 - Manual (Page 50)

Chapter 3 Printer Configuration
50
Changing Printer Configurations
IMPORTANT In order to properly configure the printer, it is important that
you have a current configuration printout, as described
previously. From this printout, determine which parameters
you need to change for the printer to operate correctly with the
host computer, or your specific applications.
To change printer settings such as paper length, emulation, and
host I/O interface, perform the following steps:
Step Press LCD Message
1. Place the printer offline. OFFLINE
PAPER CONTROL
2. Unlock the ENTER key. ENTER SWITCH
UNLOCKED
3. Scroll through the menu until
you reach the appropriate
menu. OFFLINE
HOST INTERFACE
4. Select the menu to access
available parameters or
submenus. HOST INTERFACE
Centronics
5. Scroll through the submenus or
parameters until you reach the
one you want. HOST INTERFACE
Serial
6. Select this submenu parameter
to access the value options. Serial
Host Protocol
7. Scroll through the submenu
options until you reach the
desired value. Serial
Baud Rate
ONLINE
+
OR
OR
OR