Printronix L5020 - Manual (Page 215)

217
C
Host I/O Interfaces
Interfaces
The printer provides connections inside the left side panel for the
following host I/O interfaces:
• Serial Interface (RS-232 or RS-422)
• Centronics Parallel Interface
• Dataproducts Parallel Interface
The parameters for each interface are selected through the control
panel via the “Host Interface” menu. (See page 65.)
The location of the interface connectors is shown in Figure 9.
You must supply the interface cable to connect the printer to your
host computer. To facilitate the choice or manufacture of an
interface cable for your application, pin assignments for the Serial,
Centronics, and Dataproducts interfaces are provided in this
appendix.