Mode menu – Printronix L5020 User Manual
Page 61
Mode Menu
61
When you load a configuration having a different Paper Length,
the same operation occurs: the printer sends form feeds rather
than cutting the page and reverse-feeding it out of the printer.
•
FAULT HANDLING: In normal operation, roll-fed paper is not
removed from the printer. However, after a fault that requires
reprinting (such as a paper jam), you must remove the paper
and reseat it in the tractors. The control panel indicates when
this is necessary.
•
BOOT: When powering on, the printer does not cut the paper in
the printer or roll it back out of the printer.
Mode Menu
“Mode” refers to the emulation software that you use. Your printer
comes equipped with the Printronix LinePrinter Plus emulation
software (which emulates an impact printer). The IGP/PGL, IGP/
VGL, PhoenixPage PCL5 , and IPDS software emulations are
available as options.
Mode
LinePrinter
+
A
PCL5
IGP/PGL
IGP/VGL
B
C
D
See also the following documents:
A.
LinePrinter Plus Emulation for LaserLine Printers Programmer’s Reference Manual
B.
PhoenixPage PCL5 Emulation Operator’s Guide
C.
IGP/PGL Emulation for LaserLine Printers Programmer’s Reference Manual
D.
IGP/VGL Emulation for LaserLine Printers Programmer’s Reference Manual
E.
IPDS Emulation for LaserLine Printers Programmer’s Reference Manual
NOTE:
The order and number of options displayed in this menu structure varies depending on the
emulations that are installed.
IPDS
E