Printronix L5020 - Manual (Page 99)

Loading Flash Memory (If Equipped)
99
24. At the DOS prompt type:
A:\PKUNZIP A:\ part_num
where part_num is the six digit number you noted in the
previous step.
(Replace A: with B: if you are using the B drive.)
25. The PKUNZIP
®
program will execute, and the following
message will appear on the computer screen:
Insert disk #1 - Press a key when ready
26. Remove the diskette in the disk drive and insert the diskette
labeled
Disk 1 of 2 (or 1 of 3, etc.)
27. Press the <Return> key on the computer. After the file is
expanded to the hard drive, the following message will appear
on the computer screen:
Insert disk #2 - Press a key when ready
28. Remove the diskette in the disk drive and insert the diskette
labeled
Disk 2 of 2 (or 2 of 3, etc.)
29. Press the <Return> key on the computer. If there are only two
diskettes for the emulation, you will be returned to the DOS
prompt when the expansion is complete. If there are more than
two diskettes, you will be asked to insert disk #3 and press a
key. Continue in this manner until you have inserted all of the
emulation diskettes and the DOS prompt has returned.