Printronix L5020 - Manual (Page 120)

Chapter 4 Consumables Replacement
120
11. Pull the drum out along the drum auxiliary rod. Hold the front
and back ends when the drum is nearly out of the printer, and
remove it with both hands.
Legend:
1) Drum
12. Pack the old drum for shipment using the original packaging
material, and close the cover of the box.
13. Wipe the drum shaft clean with a cloth.
Installation
CAUTION Avoid touching the surface of the drum with your hands. It
reduces the life of the drum
1. Remove the new photoreceptor drum from its package. Do not
discard the packaging material; as you need it for future drum
disposal. The ends of the drum are identical; there are no front
or back ends.
2. Wipe inside the endcaps of the drum with a cloth to ensure that
they are clean.
1