Printronix L5020 User Manual
Page 189
Error Messages
191
TABLE NOTES:
1.
For
any error with Reprint on Fault enabled: If the printer stops
while in the middle of printing a page, reloading the paper and
reprinting are required. There may be other cases requiring
reloading and reprinting; if so, a message appears.
2.
For
any error with Reprint on Fault disabled: If the printer stops
while in the middle of printing a page, reloading the paper is
required and pages are lost.
3.
For error numbers 01, 14, and 15: If the error occurs while
paper is
not moving, it is not necessary to reload or reprint.
4.
For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5.
Status message only. No operator action required to clear
message.
K1
File Not Compatible
á
K2
Wrong File Checksum
á
K3
DC Program Not Valid
á
K4
No Flash File System
á
K5
DRAM Fail at Address
XXXXXXXX
á
K6
Flash Memory Fail
á
K7
Program Flash Fail at
XXXXXXXX
á
K8
Flash Memory Full
á
K9
Program Needs More
DRAM
á
L0
Invalid DRAM*/
Configuration
á
Error
Code
Error Message
Operator
Correctable
Field
Service
Required
Reprint
Required