Pitney Bowes DM1000 - Manual (Page 130)

9
SV60951 Rev. A
9-9
DM1000 Operating Guide
Cleaning
Printer Nozzles If you notice the meter stamp is not printing completely and there are
white lines going through it, you will need to perform printer maintenance.
First, clean the printer nozzle.
How to Clean the Printer Nozzle
1. Press the Menu Key.
2. Select Maintenance.
3. Select Clean Printer Nozzle.
The print engine performs a cleaning cycle on the nozzles.
4. Select Print Test Pattern from the Maintenance menu to make
sure the print nozzles are cleaned and the meter stamp is of high
quality.
See Print a Test Pattern in this chapter.
Poor Meter Stamp
Good Meter Stamp