Pitney Bowes DM1000 - Manual (Page 58)

4
SV60951 Rev. A 4-25
DM1000 Operating Guide
10. Press the Tape key to print a tape. To print postage on a piece of mail,
place it on the feeder and press the Start key.
11. Apply the barcode label to the piece of mail.
12. Press the Enter key. The “More to Process?” screen appears. Follow
the screen prompts to process more confirmation pieces of mail.
NOTE: Make sure the barcode on the label matches the barcode
number you just entered in the system.
Using Confirmation
Services Before
Printing Postage
(continued)
a.) If you have used the confirmation service before, the next barcode
number (in the series of barcode labels) appears.
b.) If you have used all of the labels in a series of barcode labels, you
need to enter the part of the barcode numbers that corresponds to
the first label in the new series.
9. Press the Enter key to accept the barcode number and the system
returns to the main screen (“Attached Scale Mode” appears).
7. Press the Enter key and the “Barcode” screen appears.
8. If this is the first time you are entering a confirmation service, the
screen is blank and you need to enter the entire barcode value.