Pitney Bowes DM1000 - Manual (Page 140)

10
SV60951 Rev. A
DM1000 Operating Guide
10-5
Tape System
Wet /dry lever is set dry
position.
Move wet/dry lever up to the
wet position. (Lever down is
dry position.)
Problem Possible Cause Solution
Gummed Tape
Not Wet
(continued)
No solution in bottle.
Brush not out far enough to
reach tape.
1. Move the tape lever to the
up position.
2. Move the brush lever to
the right to pull the brush
mechanism forward.
3. Remove the brush.
4. Pull out brush and
readjust to longer length.
5. Reinstall brush and
release holder to return
original position.
Dry
Position Wet
Position
Refill solution bottle.
Need pictures
tape
lever
>
>