NetComm V100 User Manual
Page 17
Advertising
YML749Rev1
V100 User Guide
www.netcomm.com.au
17
DNS 1:
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router.
DNS 2:
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router. DNS 2 can be a different address to DNS 1 to provide a
backup DNS server if DNS 1 fails.
MAC Address:
The unique hexadecimal hardware address of the V100 ATA's
NIC (Network Interface Card). This cannot be modified.
Status:
Indicates whether the ATA has correct communication with
DHCP server or PPPoE server when DHCP and PPPoE mode is
used respectively.
Advertising