Connection mode tab – NetComm V100 User Manual

Page 18

Advertising
background image

V100 User Guide

YML749Rev1

18

www.netcomm.com.au

Connection Mode Tab

Clicking on the Connection Mode tab brings up the following window:

PPPoE:

Select this option if your V100 ATA uses PPPoE to authenticate
with the modem / router.

User name:

The PPPoE account username. This is not your VoIP number.
This username is issued by your ISP.

Password:

The PPPoE account password. This is not your VoIP password.
This password is issued by your ISP.

DHCP:

Specifies that the V100 ATA must request its TCP/IP address
details from a DHCP service running on your network. This
service is usually available on your ADSL modem / router.

Fixed IP:

Allows you to specify the addressing details of the V100 ATA on
your network:

Advertising