NetComm NP2724M - Manual (Page 15)

2) copy system_image
This command is used to backup switch runtime image
Format copy system_image tftp <A.B.C.D> <filename>
Mode Privileged Mode
e.g. Switch#copy system_image tftp 192.168.1.100 image_file
3) copy tftp
This command is used to upload configuration or runtime image
Format copy tftp <A.B.C.D> file <filename> {nvram_config | system_image}
Mode Privileged Mode
e.g.
Switch#copy tftp 192.168.1.100 file switch_configuration nvram_config
Switch#copy tftp 192.168.1.100 file runtime_code system_image
exit
This command is used to exit current shell
Format exit
Mode Privileged Mode
help
This command displays help information
Format help
Mode Privileged Mode
logout
This command is used to exit current shell
Format logout
Mode Privileged Mode
ping
This command is used to proceed ping destination host
Format ping <A.B.C.D>
Mode Privileged Mode
reload
This command is used to reboot system
Format reload
Mode Privileged Mode
save
This command is used to save configuration
Format save
Mode Privileged Mode
show
This command is used to show configured data
1) show qos
This command display class of service information
1.1) show qos cos
This command display the cos mapping
Format show qos cos
Mode Privileged Mode
1.2) show qos queue-settings
NP2724M User Manual 14