NetComm NP2724M - Manual (Page 32)

5) snmp trapstation
5.1) snmp trapstation add
Create a snmp trap station.
5.1.1) snmp trapstation add <ip-addr> community <community name>
type bootup
Send trap when system reboot
Format snmp trapstation add <ip-addr> community <community
name> type bootup trap-version {1|2}
Mode Global Config
5.1.2) snmp trapstation add <ip-addr> community <community name>
type linkchange
Send trap when port link change.
Format snmp trapstation add <ip-addr> community <community
name> type linkchange trap-version {1|2}
Mode Global Config
5.1.3) snmp trapstation add <ip-addr> community <community name>
type both
Send trap when system reboot or port link change.
Format snmp trapstation add <ip-addr> community <community
name> type both trap-version {1-2}
Mode Global Config
5.1.4) snmp trapstation add <ip-addr> community <community name>
type none
Send no trap.
Format snmp trapstation add <ip-addr> community <community
name> type none trap-version {1-2}
Mode Global Config
5.2) snmp trapstation delete
This command delete a trap station.
Format snmp trapstation delete <WORD>
Mode Global Config
sntp
1) sntp daylight
This command enables or disables the daylight saving configuration.
Format sntp daylight {enable|disable}
Mode Global Config
2) sntp localtime
Configure the local time.
2.1) sntp localtime enable
This command enables local time.
Format sntp localtime enable
Mode Global Config
2.2) sntp localtime localtime_date
This command sets local time.
Format sntp localtime localtime_date <year> <month> <date> <hour>
<minute> <second>
Mode Global Config
3) sntp server
3.1) sntp server enable
This command enables sntp server.
NP2724M User Manual 31