NetComm NP2724M - Manual (Page 48)

co-operate with the RADIUS servers.
□Supports broadcast, known-multicast, and unknown uni-cast storm control
□Supports web-based interface for management
□Supports CLI interface for local console or remote Telnet management
□Supports TFTP, HTTP and X-modem protocol for firmware/configuration
upgrade or backup.
3.2.2. Hardware Specification
NP2724M 24 Port 10/100 + 2 Gigabit VLAN Managed Switch
□ Supports 24 ports 100Base-TX and 2 1000BaseT with 2 shared Mini-GBIC.
□ IEEE 802.3ab Auto MDI/MDI-X on all 10/100/1000 twisted-pair ports
□ Automatic polarity detection and correction on all RJ-45 ports for automatic
adjustment of wiring errors
□ Provides Flow Control mechanism to prevent packet loss, IEEE802.3x
Flow
Control for full-duplex operation and back pressure for half-duplex operation
□ Supports 8K MAC address and Up to 3Mb packet buffer
□ Supports Store & Forward architecture and performs forwarding and
filtering
□ Provides non-blocking switching performance
□ Provides a RS-232 port for system configuration.
3.2.3. Environments Specification
NP2724M 24 Port 10/100 + 2 Gigabit VLAN Managed Switch
Size (H x W x D) 44.45 x 430 x 180mm
Weight(Net/Gross) 2.4kg / 3.5kg (88.2 oz / 123.5 oz)
NP2724M User Manual 47