NetComm NP2724M - Manual (Page 47)

3.2. Technical Specifications
3.2.1. Software Specification
NP2724M 24 Port 10/100 + 2 Gigabit VLAN Managed Switch
□Four groups (history, statistics, alarms, and events) of embedded remote
monitoring (RMON) agents for network monitoring and traffic analysis
□Provides SNMP protocol(v1/v2c/v3) to monitor and control the switch by
using SNMP management applications such as HP Open View
□ IGMP snooping support to limit the flooding of IP multicast traffic and
filtering for controlling the set of multicast groups to which the hosts that
connected to the switch
□ Supports 802.1d/1w/1s Spanning Tree Protocol for loop free installation.
□ Supports 802.1Q VLAN for assigning users to VLAN associated with
appropriate network resources, traffic patterns, and bandwidth. Up to 256
VLAN entries can be configured
□ Supports Management VLAN for administration to protect switch to be
attacked by client.
□Built-in DHCP client to get IP address from DHCP server automatically
□Supports SNTP to synchronize the precision time with Internet Time server.
□Supports one-to-one or many-to-one Port Mirroring.
□Supports IEEE 802.3ad Link Aggregation, up to 3 aggregation groups.
□ Supports for IEEE 802.1p/DSCP CoS scheduling for classification and
preferred high-priority voice traffic on a port-port basis
□ Per port Ingress and Egress Rate Limiting. Minimum rate is 64 Kbps,
granularity is 64 Kbps
□ Supports Static Mode and Dynamic Learning Mode for Port Security
function. Support up to 24 MAC addresses for each port.
□Supports Protected port feature.
□Supports 802.1X port-based authentication, and build-in RADIUS client to
NP2724M User Manual 46