NetComm NP2724M User Manual

Page 33

Advertising
background image

Format sntp server enable
Mode Global Config

3.2) sntp server ipaddr

This command sets sntp server IP address.
Format sntp server ipaddr <IP-addr>
Mode Global Config

3.3) sntp server polling

This command sets sntp server polling time interval.
Format sntp serve polling <0-9>
Mode Global Config

4) sntp timezone

This command sets sntp timezone.
Format sntp timezone <1-75>
Mode Global Config


spanning-tree
1) spanning-tree forceversion

This command configures Spanning Tree protocol version.
1.1) spanning-tree forceversion 8021s

This command selects spanning tree type as 8021.s(multiple Spanning
Tree).
Format spanning-tree forceversion 8021s
Mode Global Config

1.2) spanning-tree forceversion 8021w

This command selects spanning tree type as 802.1w(rapid Spanning
Tree).
Format spanning-tree forceversion 8021w
Mode Global Config

1.3) spanning-tree forceversion none

This command selects none spanning tree type.
Format spanning-tree forceversion none
Mode Global Config

2) spanning-tree configuration

This command configures MSTP region name and revision.
2.1) spanning-tree configuration name

This command configures MSTP region name (Max.32 chars).
Format spanning-tree configuration name <WORD>
Mode Global Config

2.2) spanning-tree configuration revision

This command configures revision level.
Format spanning-trees configuration revision <0-65535>
Mode Global Config

3) spanning-tree forward-time

This configures the bridge forward delay parameter.
Format spanning-tree forward-time <4-30>
Mode Global Config

4) spanning-tree max-age

This command configures the bridge max age parameter.
Format spanning-tree max-age <6-40>
Mode Global Config

5) spanning-tree max-hops

NP2724M User Manual

32

Advertising