NetComm NP2724M User Manual

Page 18

Advertising
background image

Mode Privileged Mode

9) show network

This command is used to configuration for inband connectivity
Format show network
Mode Privileged Mode

10) show port

This command is used to display port mode and settings, display port status
10.1) show port port-index

This command is used to specify an switch interface
Format show port port-index <port-ID>
Mode Privileged Mode

10.2) show port all

This command is used to display all switch interface
Format show port all
Mode Privileged Mode

11) show port-security

This command is used to display port security settings
11.1) show port-security port

This command is used to specify an switch interface
Format show port-security port <port-ID>
Mode Privileged Mode

11.2) show port-security all

This command is used to display all interfaces’ status
Format show port-security all
Mode Privileged Mode

12) show rate-limit

This command is used to ingress and egress rate limit information
12.1) show rate-limit port

This command is used to specify an switch interface
Format show rate-limit port <port-ID>
Mode Privileged Mode
e.g. Switch#Show rate-limit port 1
Switch#Show rate-limit port g1

12.2) show rate-limit all

This command is used to display all interfaces’ status
Format show Rate-Limit all
Mode Privileged Mode

13) show running-config

This command is used to display switch running config
Format show running-config
Mode Privileged Mode

14) show snmp

This command is used to display all snmp config
14.1) show snmp groups

This command display all snmp groups
Format show snmp groups
Mode Privileged Mode

14.2) show snmp users

This command display all snmp users
Format show snmp users
Mode Privileged Mode

NP2724M User Manual

17

Advertising