NetComm NP2724M - Manual (Page 25)

2.2) log logging-target flash
This command is used to specify flash log notify-level
Format log logging-target flash {enable|disable}
Mode Privileged Mode
2.3) log logging-target console
This command is used to specify console log notify-level
Format log logging-target console {enable|disable}
Mode Global Config
2.4) log logging-target server
This command is used to specify console log notify-level
Format log logging-target server name <WORD> {enable|disable}
Mode Global Config
radius-server
This command is used to configure radius server
Format radius-server ip <IP addr>
Mode Global Config
static-address
This command is used to specify static address
1) static-address add
This command is used to add static mac address
Format static-address add <mac addr> vid <vlan-ID> port <port-ID>
Mode Global Config
2) static-address delete
This command is used to delete static mac address
Format static-address delete <mac addr> vid <vlan-ID>
Mode Global Config
mgmt-access list
1) mgmt-accesslist ipaddr
This command specifies a management access IP for the DUT, up to 8 IP
address can be set.
Format mgmt-accesslist ipaddr <IP addr>
Mode Global Config
2) mgmt-accesslist enable
This command enables management access list. Only the IP address
specified in the management list is allowed to access DUT.
Format mgmt-accesslist enable
Mode Global Config
3) mgmt-accesslist disable
This command disables management access list.
Format mgmt-accesslist disable
Mode Global Config
monitor
1) monitor enable
This command enables port mirroring.
Format monitor enable
Mode Global Config
NP2724M User Manual 24