NetComm NP2724M - Manual (Page 6)

Figure 2.5.1 Network Configuration for NP2724M
(NEED TO REPLACED BY the FRONT PANEL IMAGE of a NP2724 swtich)
Read and perform the following procedures to install the switch,
Pre-Installation Considerations
Gigabit Considerations:
If you will use the switch for Gigabit applications, keep in mind that the
maximum UTP cabling length of Category 5e cable is 328 feet (100 meters).
Positioning the switch:
When choosing a location for the switch, observe the following guidelines:
Keep enough ventilation space between the switch and the surrounding
objects.
Keep cabling away from sources of electrical noise, power lines, and
fluorescent lighting fixtures.
Do not stack free-standing switch more than four units high. One other way to
deploy multiple NP2724M’s is by using a star network topology and connect.
Desktop or Shelf Mounting
To install the switch on a desktop or shelf, simply complete the following steps:
Step 1
Place the switch on a desktop or shelf near an AC power source.
Step 2
NP2724M User Manual 5