NetComm NP2724M - Manual (Page 27)

Mode Global Config
3) network protocol
This command configure switch dhcp client.
Format network protocol {dhcp|none}
Mode Global Config
4) network dhcp-relay
Configure switch dhcp relay functions.
4.1) network dhcp-relay mode
This command configures dhcp relay mode.
Format network dhcp-relay mode {enable|disable}
Mode Global Config
4.2) network dhcp-relay server
This command configures dhcp-relay server ip-address.
Format network dhcp-relay server <A.B.C.D>
Mode Global Config
4.3) network dhcp-relay vlan
Configure dhcp-relay option-82 vlan information.
3.1) network dhcp-relay vlan <vlan-ID> add
This command enters a vlan which will be enable DHCP-relay option82.
Format network dhcp-relay vlan <vlan-ID> add
Mode Global Config
3.2) network dhcp-relay vlan <vlan-ID> remove
This command enters a vlan which will be disable dhcp-relay option82.
Format network dhcp-relay vlan <vlan-ID> remove
Mode Global Config
5) network sysinfo
Configure switch system information.
5.1) Network sysinfo sysname
This command configures system name.
Format network sysinfo sysname <WORD>
Mode Global Config
5.2) network sysinfo syslocate
This command configures system location.
Format network sysinfo syslocate <WORD>
Mode Global Config
5.3) network sysinfo syscontact
This command configures system contact information.
Format network sysinfo syscontact <WORD>
Mode Global Config
6) network admin-timeout
This command configures web/console admin time out interval.
‘0’ means disable.
Format network admin-timeout <0-65535>
Mode Global Config
port-all
1) port-all admin-mode
This command configures ports admin mode.
Format port-all admin-mode {enable | disable}
Mode Global Config
2) port-all auto-negotiate
NP2724M User Manual 26