National Instruments Measure Data Acquisition - Manual (Page 13)

Chapter 1 Introduction
© National Instruments Corporation 1-3 Measure Data Acquisition User Manual
Manually Adding or Removing the DAQ Add-In
To add the DAQ Add-In manually, complete the following steps.
1. Select Tools»Add-Ins.
2. In the Add-Ins dialog box, search the Add-Ins Available list box
for the Measure Data Acquisition Add-In entry. Click in the
checkbox next to the Measure Data Acquisition Add-In entry. If
you cannot find the entry, click the Browse button and look for
DAQ.XLA in the directory where you installed Measure.
To remove the DAQ Add-In manually, deselect the checkbox next to it,
shown in Figure 1-1. The next time you launch Excel, Excel will not
load the DAQ Add-In automatically.
Figure 1-1. Add-Ins Dialog Box
Uninstalling Measure
To uninstall Measure, remove both the Serial Add-In and the Data
Acquisition Add-In from the Add-Ins list in Excel. Double-click the
Uninstall icon in the Measure folder to remove Measure from your
computer.