National Instruments Measure Data Acquisition - Manual (Page 49)

Appendix A DAQ Hardware Capabilities
Measure Data Acquisition User Manual A-4 © National Instruments Corporation
Lab and 1200 Series and Portable Devices Hardware Capabilities
Table A-5. Analog Input Configuration Programmability—Lab, 1200 Series, Portable Devices
Device Gain Range Polarity SE/DIFF coupling
Lab-PC+ By group By group By device By device DC
SCXI-1200
DAQPad-1200
DAQCard-1200
PCI-1200 By group By group By group By group DC
DAQCard-500 1 Only 1 range available Bipolar SE DC
DAQCard-700 1 By group Bipolar By group DC
PC-LPM-16 1 By device Bipolar SE DC
Note: “By device” means you select the value of a parameter with hardware jumpers, and
the selection affects any group of channels on the device. “By group” means you
program the selection through software, and the selection affects all the channels
used at the same time. “By channel” means you program the selection with hardware
jumpers or through software on a per channel basis. When a specific value for a
parameter is shown, that parameter value is fixed.