National Instruments Measure Data Acquisition - Manual (Page 48)

Appendix A DAQ Hardware Capabilities
© National Instruments Corporation A-3 Measure Data Acquisition User Manual
Table A-3. Analog Input Characteristics—MIO and AI Devices (Part 2)
Device Triggers
1
Max Sampling Rate (S/s)
AT-MIO-16E-1
AT-MIO-16E-2
AT-MIO-64E-3
AT-MIO-16E-10
AT-MIO-16DE-10
NEC-AI-16E-4
NEC-MIO-16E-4 Pre, Post E-1: 1 M,
E-2 and E-3: 500 k,
E-4: 250 k,
E-10 and DE-10: 100 k
SB-MIO-16E-4 Pre, Post 250 k
All MIO-16XE-50 Devices
NEC-AI-16XE-50 Pre, Post 20 k
AT-MIO-16F-5
AT-MIO-64F-5 Pre, Post 200 k
AT-MIO-16X
AT-MIO-16/16D Pre, Post 100 k
1 Pre=Pretrigger, Post=Posttrigger.
Table A-4. Analog Output Characteristics—MIO and AI Devices
Device Channel
Numbers
DAC
Type Output Limits (V) Waveform Grouping
All MIO-16E Devices
AT-MIO-16DE-10
AT-MIO-64 E-3
AT-MIO-16XE-50
DAQPad-MIO-16XE-
50
PCI-MIO-16XE-50 0, 1 12-bit double buffered
(E-1, E-2, 64E-3, and
E-4: 2 K FIFO) 0 to 10, ±10, ±Vref,
0 to Vref (only ±10
on XE-50 devices) 0, 1, or 0 and 1
AT-MIO-16F-5
AT-MIO-64F-5 0, 1 12-bit double buffered
(64F-5: 2 K FIFO) 0 to 10, ±10, ±Vref,
0 to Vref 0, 1, or 0 and 1
AT-MIO-16X 0, 1 16-bit double buffered
(2 K FIFO) ±10, 0 to 10, ±Vref,
0 to Vref 0, 1, or 0 and 1
AT-MIO-16/16D 0, 1 12-bit double buffered 0 to 10, ±10, ±Vref,
0 to Vref
0, 1, or 0 and 1