National Instruments Measure Data Acquisition - Manual (Page 93)

© National Instruments Corporation I-1 Measure Data Acquisition User Manual
A
Acquire until trigger option, Hardware
Digital Trigger dialog box, 4-7
Add button
Analog Input Configuration dialog box,
2-3, 3-4
Analog Output Configuration dialog box,
5-1
adding DAQ Add-In manually, 1-3
adding tasks to DAQ menu, 2-7 to 2-8
Advanced Analog Output configuration
dialog box, 5-3 to 5-4
illustration, 5-3
options (table), 5-4
Advanced button, Analog Output
Configuration dialog box, 5-1
Advanced Timing Settings dialog box
illustration, 4-10
options (table), 4-10
AI option, DAQ Tasks dialog box, 2-2, 2-10
analog input, SCXI modules, 3-2 to 3-4
channel strings syntax (table), 3-4
multiple SCXI modules and chassis, 3-3
to 3-4
analog input characteristics
Lab and 1200 Series and portable devices
(table), A-5
MIO and AI devices (table), A-2 to A-3
SCXI modules (table), A-6
analog input configuration. See also Analog
Input Configuration dialog box.
advanced timing settings, 4-10
display, 4-6
mode reference, 4-8 to 4-9
scan information, 4-4
selecting channels for scanning, 4-2 to 4-3
task configuration, 2-3 to 2-5
timing settings, 4-4 to 4-5
trigger reference, 4-7 to 4-8
Analog Input Configuration dialog box
Analog Input Scan List, 2-3, 4-2 to 4-4
At Cell, 4-6
Cancel, 4-7
Channels, 2-3, 4-2 to 4-3
Description, 2-4, 4-7
Display section, 2-4, 4-6 to 4-7
External scan clock, 4-5
Hardware Digital Trigger dialog box, 4-7
to 4-8
High limit, 4-3
illustration, 4-2
In Columns, 4-6
In Rows, 4-6
Low Limit, 4-4
Mode, 4-7
multiple SCXI modules and chassis, 3-3
to 3-4
Number of scans, 4-4
OK, 4-7
Scale to volts, 4-4
Scan Information section, 2-3 to 2-4, 4-4
to 4-5
Scan Rate section, 2-4, 4-4 to 4-5
Scans/second, 2-4, 4-5
Task Name, 2-4, 4-6
Trigger, 4-6