Adding tasks to the daq menu, Figure 2-6. daq tasks dialog box, Figure 2-6 – National Instruments Measure Data Acquisition User Manual
Page 20: Daq tasks dialog box
Chapter 2 Getting Started with Data Acquisition Tasks
© National Instruments Corporation
2-7
Measure Data Acquisition User Manual
dialog box. Notice that your new analog output task appears in the
task list, shown in Figure 2-6.
Figure 2-6. DAQ Tasks Dialog Box
10. Highlight the
Output 10 iterations
task and click on the
Run button to execute the analog output task. Make sure you have
valid voltage data in cells A1:A10 before running the task.
Adding Tasks to the DAQ Menu
Now that the two tasks are configured and tested from the DAQ Tasks
dialog box, you may want to make them more accessible from your
spreadsheet. With Measure, you can easily add these tasks to the DAQ
menu.
1.
Select DAQ»Configure DAQ Tasks.
2.
Click on the Edit Menu button to display the Edit DAQ Menu
dialog box, shown in Figure 2-7.