National Instruments Measure Data Acquisition - Manual (Page 50)

Appendix A DAQ Hardware Capabilities
© National Instruments Corporation A-5 Measure Data Acquisition User Manual
Table A-6. Analog Input Characteristics—Lab, 1200 Series, Portable Devices (Part 1)
Device Number of
Channels
Resolution
(bits)
Gains 1 Range (V) 1 Input FIFO
(samples)
Lab-PC+
SCXI-1200
DAQPad-1200
DAQCard-1200
PCI-1200 8SE, 4DI 12 1, 2, 5, 10 20, 50,
100 ±5, 0 to 10 2,048;
Lab-PC: 512
DAQCard-500 8SE 12 1 ±5 16
DAQCard-700 16SE, 8DI 12 1 ±10, ±5, ±2.5 512
PC-LPM-16 16SE 12 1 ±5, ±2.5,
0 to 10,
0 to 5 16
1 You can determine the limit settings of your device by dividing the range by the desired gain.
Table A-7. Analog Input Characteristics—Lab, 1200 Series, Portable Devices (Part 2)
Device Scanning Triggers Max Sampling
Rate (S/s)
Lab-PC+
SCXI-1200
DAQPad-1200
DAQCard-1200 Any single channel; for
multiple channels, N through
0, where N=7 Pretrigger, and posttrigger with
digital trigger 100 k;
Lab-PC+: 83 k
DAQCard-500 Any single channel; for
multiple channels, N through
0, where N=7 — 50 k
DAQCard-700 Any single channel; for
multiple channels, N through
0, where N=15 — 100 k
PC-LPM-16 Any single channel; for
multiple channels, N through
0, where N=15 — 50 k