National Instruments Measure Data Acquisition - Manual (Page 46)

© National Instruments Corporation A-1 Measure Data Acquisition User Manual
DAQ Hardware Capabilities
This appendix contains SCXI information, and tables that summarize
the analog I/O capabilities of National Instruments data acquisition
(DAQ) devices you might use with Measure for Windows. The devices
in this appendix are grouped into categories. The DAQ device
categories for these tables include the following.
• MIO and AI Devices
• Lab and 1200 Series and Portable Devices
• SCXI Modules
• Analog Output Only Devices
SCXI Information
You cannot use the SCXI Analog Output Module (SCXI-1124) with
Measure.
Measure works with all Data Acquisition devices supported by NI-
DAQ except EISA-A2000, AT-A2150, and AT-DSP 2200.
MIO and AI Device Hardware Capabilities
Table A-1. Analog Input Configuration Programmability—MIO and AI Devices
Device Gain Range Polarity SE/DIFF coupling
All MIO-E Series Devices
All AI-E Series Devices By Channel By Channel By Channel By Channel DC
AT-MIO-16F-5 By Channel By Group By Group By Group DC
AT-MIO-64F-5
AT-MIO-16X By Channel By Channel By Channel By Channel DC