Nortel Networks 1000ASE-XD - Manual (Page 104)

104 Chapter 3 Using the console interface
209418-A
Table 13 describes the Switch Configuration Menu options.
Table 13 Switch Configuration Menu options
Option Description
MAC Address Table Displays the MAC Address Table screen (see “MAC Address Table
screen” on page 105 ). This screen allows you to view all MAC
addresses and their associated port or trunk that the switch has
learned, or to search for a particular MAC address (to see if the switch
has learned the address).
MAC Address Security
Configuration... Displays the MAC Address Security Configuration menu (see “MAC
Address Security Configuration Menu screen” on page 107 ). This
screen allows you to set up the MAC address security feature and
provides the following options: MAC Address Security Configuration,
MAC Address Security Port Configuration, MAC Address Security
Port Lists, and MAC Address Security Table. This menu allows you to
enable and disable security features on the port and trunk levels.
VLAN Configuration... Displays the VLAN Configuration Menu (see “VLAN Configuration
Menu screen” on page 120 ). This menu provides the following
options: VLAN Configuration, VLAN Port Configuration, VLAN Display
by Port, MAC-SA, and Return to Switch Configuration Menu screen.
This menu allows you to create and modify VLANs.
Port Configuration... Displays the Port Configuration screen (see “Port Configuration
screen” on page 129 ). This screen allows you to configure a specific
switch port, all switch ports or, when in a stack configuration, all stack
ports.
High Speed Flow Control
Configuration... Displays the High Speed Flow Control Configuration screen.
MultiLink Trunk Configuration... Displays the MultiLink Trunk Configuration Menu (see “MultiLink Trunk
Configuration Menu screen” on page 133 ). This menu provides the
following options: MultiLink Trunk Configuration, MultiLink Trunk
Utilization, and Return to Switch Configuration Menu screen. This
menu allows you to create and modify trunks, and to monitor the
bandwidth utilization of configured trunks.
Port Mirroring Configuration... Displays the Port Mirroring Configuration screen (see “Port Mirroring
Configuration screen” on page 139 ). This screen allows you to
designate a single switch port as a traffic monitor for one specific port.
Display Port Statistics Displays the Port Statistics screen (see “Port Statistics screen” on
page 141 ). This screen allows you to view detailed information about
any switch port.