Nortel Networks 1000ASE-XD - Manual (Page 94)

94 Chapter 3 Using the console interface
209418-A
IP Configuration/Setup screen
The IP Configuration/Setup screen ( Figure 41 ) allows you to set or modify the
BayStack 420 Switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press [Enter].
To open the IP Configuration/Setup screen:
Figure 41 IP Configuration/Setup screen
Table 10 describes the IP Configuration/Setup screen fields.
Choose IP Configuration/Setup (or press i) from the main menu.
Note: The read-only fields in this screen are updated based on the BootP
mode specified in the BootP Request Mode field. (See
“Choosing a
BootP request mode” on page 96 for more information.)