Nortel Networks 1000ASE-XD - Manual (Page 75)

Chapter 2 Network configuration 75
Using the BayStack 420 10/100/1000 Switch
Figure 31 MultiLink Trunk Configuration screen for Switch S1
Switch S1 is configured as follows:
• Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch
ports specified in the Trunk Members fields.
• Trunk Members (Unit/Port) indicates the ports that can be configured, in
each row, to create the corresponding trunk:
Note: The Unit value (in the Unit/Port field) is not configurable when
the switch is operating standalone. For detailed information about the
MultiLink Trunk Configuration screen fields, see
“MultiLink Trunk
Configuration screen” on page 135 .