Nortel Networks 1000ASE-XD - Manual (Page 148)

148 Chapter 3 Using the console interface
209418-A
Figure 68 Console/Comm Port Configuration screen
Table 33 describes the Console/Comm Port Configuration screen fields.
Table 33 Console/Comm Port Configuration screen fields
Field Description
Comm Port Data Bits A read-only field that indicates the current console/comm port data bit setting.
Comm Port Parity A read-only field that indicates the current console/comm port parity setting.
Comm Port Stop Bits A read-only field that indicates the current console/comm port stop bit setting.
Console Port Speed Allows you to set the console/comm port baud rate to match the baud rate of the
console terminal.
Default Value: 9600 Baud
Range: 2400 Baud, 4800 Baud, 9600 Baud, 19200 Baud, 38400 Baud
Caution: If you choose a baud rate that does not match your console
terminal baud rate, you will lose communication with the configuration
interface when you press [Enter]. If communication is lost, set your
console terminal to match the new service port setting.