Nortel Networks 1000ASE-XD - Manual (Page 119)

Chapter 3 Using the console interface 119
Using the BayStack 420 10/100/1000 Switch
Figure 53 MAC Address Security Table screen
Table 19 describes the MAC Address Security Table screen fields.
Table 19 MAC Address Security Table screen fields
Field Description
Find an Address Allows you to search for a specific MAC address that is used in any of the
MAC Address Security Table screens.
MAC Address Allows you to specify up to 448 MAC addresses that are authorized to access
the switch. You can specify the ports that each MAC address is allowed to
access using the Allowed Source field (see next field description). The
specified MAC address does not take effect until the Allowed Source field is
set to some value (a single unit/port number or a port list value that you
previously configured in the MAC Address Security Port Lists screen). You
can clear an existing MAC address field by entering zero (0) in the field and
pressing [Enter].
Default - - - - - (no address assigned)
Range A range of 6 Hex Octets, separated by dashes (multicast 1
and broadcast addresses are not allowed).
Allowed Source Allows you to specify the ports that each MAC address is allowed to access.
The options for the Allowed Source field include a single unit/port number or a
port list value that you have previously configured in the MAC Address
Security Port Lists screen.