Nortel Networks 1000ASE-XD - Manual (Page 65)

Chapter 2 Network configuration 65
Using the BayStack 420 10/100/1000 Switch
To configure the VLAN port membership for VLAN 1:
1 Select Switch Configuration from the BayStack 420 Switch Main Menu
(or press w).
2 From the Switch Configuration Menu, select VLAN Configuration
(or press v).
3 From the VLAN Configuration Menu select VLAN Configuration
(or press v).
The default VLAN Configuration screen opens ( Figure 22 ).
Figure 22 Default VLAN Configuration screen example
The VLAN Configuration screen settings shown in Figure 22 are default settings
with all switch ports classified as untagged members of VLAN 1.
Figure 23 shows the VLAN Configuration screen after it is configured to support
the VLAN 3 broadcast domain shown in Figure 21 on page 64 (VLAN Name is
optional).