Nortel Networks 1000ASE-XD - Manual (Page 203)

Appendix E Default settings 203
Using the BayStack 420 10/100/1000 Switch
Subnet Addr 0.0.0.0.
Subnet Mask 0.0.0.0.
Port Membership U (all ports assigned as
untagged members of
VLAN 1)
Unit 1 “VLAN Port Configuration screen” on
page 125
Port 1
Filter Untagged Frames No
Port Name Unit 1, Port 1
PVID 1
Tagging Untagged Access
Unit 1 “VLAN Display by Port screen” on
page 127
Port 1
PVID 1 (read only)
Auto PVID Disabled
Port Name Unit 1, Port 1 (read only)
Unit 1 “Port Configuration screen” on
page 129
Status Enabled (for all ports)
Autonegotiation Enabled (for all ports )
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
Trunk 1 to 6 (depending on
configuration status) “MultiLink Trunk Configuration Menu
screen” on page 133
Trunk Members (Unit/Port) Blank field
STP Learning Normal
Trunk Mode Basic
Trunk Status Disabled
Trunk Name Trunk #1 to Trunk #6
Traffic Type Rx and Tx “MultiLink Trunk Utilization screen” on
page 137
Table 56 Factory default settings (continued)
Field Default setting Appears in this CI screen