Telnet configuration screen, Figure 75 – Nortel Networks 1000ASE-XD User Manual
Page 164
Advertising
164
Chapter 3 Using the console interface
209418-A
TELNET Configuration screen
The TELNET Configuration screen (
) allows a user at a remote console
terminal to communicate with the BayStack 420 Switch as if the console terminal
were directly connected to it. You can have up to four active Telnet sessions at one
time.
To open the TELNET Configuration screen:
Figure 75 TELNET Configuration screen
Choose TELNET Configuration (or press t) from the main menu.
Advertising