Nortel Networks 1000ASE-XD - Manual (Page 134)

134 Chapter 3 Using the console interface
209418-A
You can monitor the bandwidth usage for the trunk member ports within each
trunk. For more information about configuring MultiLink Trunks, see
“MultiLink
Trunks” on page 70 .
To open the MultiLink Trunk Configuration Menu screen:
Figure 61 MultiLink Trunk Configuration Menu screen
Note: When a trunk is not active (Trunk Status field set to Disabled),
configuration changes do not take effect until you set the Trunk Status
field to Enabled.
Choose MultiLink Trunk Configuration (or press t) from the Switch
Configuration Menu screen.