Nortel Networks Mediant TP-1610 SIP - Manual (Page 170)

Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 170 Document #: LTRT-72504
• From version 4.4 to version 4.4 or to any higher version, the device retains its configuration
(ini file), however, the auxiliary files (CPT, logo, etc.) may be erased.
When using the Software Upgrade wizard, available through the Web Interface (refer to Section
5.11.1 on page 78 ), the auxiliary files are saved as well.
Note: To save the cmp file to non-volatile memory, use the -fb command line switches. If the file
is not saved, the gateway reverts to the old version of software after the next reset. For
information on using command line switches, refer to Section
B.11.6 on page 198 .
10.3.2 Vendor Specific Information Field
The Mediant 2000 uses the vendor specific information field in the BootP request to provide
device-related initial startup information. The BootP/TFTP configuration utility displays this
information in the ‘Client Info’ column (refer to
Figure B-1 ).
Note: This option is not available on DHCP servers.
The Vendor Specific Information field is disabled by default. To enable / disable this feature: set
the ini file parameter ‘ExtBootPReqEnable’ (
Table 6-1 on page 90 ) or use the ‘-be’ command line
switch (refer to Table B-1 on page 198 ).
Table 10-1 details the vendor specific information field according to device types:
Table 10-1: Vendor Specific Information Field
Tag # Description Value Length
220 Board Type
#02 = IPM-1610/TP-1610
#03 = IPMTP260
#05 = IPMTP260
1
221 Current IP Address XXX.XXX.XXX.XXX 4
222 Burned Boot Software Version X.XX 4
223 Burned cmp Software Version XXXXXXXXXXXX 12
224 Geographical Address
0 – 31
(TP-260 Only)
1
225 Chassis Geographical Address
0 – 31
(TP-260 Only)
1
229 E&M N/A 1
Table 10-2 exemplifies the structure of the vendor specific information field for a TP-1610 slave
module with IP Address 10.2.70.1.
Table 10-2: Structure of the Vendor Specific Information Field
Vendor-
Specific
Information
Code
Le
ngth
Tota
l
Ta
g Num
Le
ngth
Value
Ta
b Num
Le
ngth
Value
Ta
g Num
Le
ngth
Value (1) Value (2) Value (3) Value (4) Ta
g End
42 12 220 1 2 225 1 1 221 4 10 2 70 1 255