Nortel Networks Mediant TP-1610 SIP - Manual (Page 81)

Mediant 2000 SIP User’s Manual 5. Web Management
Version 4.4 81 July 2005
Figure 5-33: Load a CPT File Screen
7. Follow the same procedure you followed when loading the ini file (refer to Step 6 ). The same
procedure applies to the ‘Load a VP file’ (not applicable to the Mediant 2000 gateway)
screen and ‘Load a coefficient file’ screen.
8. In the ‘FINISH’ screen (refer to Figure 5-34 ), the Next button is disabled. Complete the
upgrade process by clicking Reset or Cancel.
Button Result
Reset The Mediant 2000 ‘burns’ the newly loaded files to flash memory. The ‘Burning files to flash
memory’ screen appears. Wait for the ‘burn’ to finish. When it finishes, the ‘End Process’
screen appears displaying the burned configuration files (refer to
Figure 5-35 ).
Cancel The Mediant 2000 resets, utilizing the files previously stored in flash memory. (Note that
these are NOT the files you loaded in the previous Wizard steps).
Figure 5-34: FINISH Screen