H.3.1, Figure h-1: software upgrade key screen, Belo – Nortel Networks Mediant TP-1610 SIP User Manual
Page 224
Mediant 2000 SIP
Mediant 2000 SIP User’s Manual
224
Document #: LTRT-72504
H.3.1 Loading the Software Upgrade Key Using the Embedded Web
Server
To load a Software Upgrade Key using the Web Server, take these 5
steps:
1.
Access the devices Embedded Web Server (refer to Section
).
2.
Click the Software Update button.
3.
Click the Software Upgrade Key tab; the Software Upgrade Key screen is displayed (shown
in
Figure H-1
).
4.
When loading a single key S/N line to a device:
Open the Software Upgrade Key file (it should open in Notepad), select and copy the key
string of the device’s S/N and paste it into the Web field New Key. If the string is sent in the
body of an email, copy and paste it from there. Press the Add Key button.
When loading a Software Upgrade Key text file containing multiple S/N lines to a device
(refer to
Figure H-2
):
Click the Browse button in the Send “Upgrade Key” file from your computer to the
device
field, and navigate to the Software Upgrade Key text file.
Click the Send File button.
The new key is loaded to the device, validated and if valid is burned to memory. The new
key is displayed in the Current Key field.
Validate the new key by scrolling through the ‘Key features:’ panel and verifying the
presence / absence of the appropriate features.
5.
After verifying that the Software Upgrade Key was successfully loaded, reset the device; the
new capabilities and resources are active.
Figure H-1: Software Upgrade Key Screen